Wont start on first crank
March 16th, 2013, 8:14 PM
#1
CF Beginner
Thread Starter
Join Date: Mar 2013
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Wont start on first crank
I have a 2000 2500 silverado with a 6.0. Truck will no longer start on first crank, usually starts on second try sometimes a third try is necessary. There is real bad bad gas smell when it does start. Sometimes it runs rough for 3 or 4 seconds after it starts. Any thoughts would be greatly appreciated! Fuel filter is fresh, manifold gasket replaced 8 months ago, regulator as well. No codes showing.
March 18th, 2013, 7:35 AM
#3
CF Beginner
Thread Starter
Join Date: Mar 2013
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
March 18th, 2013, 7:43 AM
#4
CF Monarch
There is a port on the fuel rail to plug in the pressure gauge. You can look for a video on Youtube to see how it is done or Google it for a diagram of where the port is.
Thread
Thread Starter
Forum
Replies
Last Post
fitzpatrick44
Silverado & Fullsize Pick-ups
1
June 8th, 2015 8:02 PM
supersport1220
Tahoe & Suburban
1
December 28th, 2013 8:14 AM
advcomps
Silverado & Fullsize Pick-ups
2
September 18th, 2013 10:22 AM
erics1983
Silverado & Fullsize Pick-ups
3
October 11th, 2010 1:03 AM
