1985 Silverado Oil Pan Gasket Replacement
#1
1985 Silverado Oil Pan Gasket Replacement
First of all, thanks to everyone for helping me. This forum is awsome!!
I am going to replace the oil pan gasket on my 1985 Chevy C10 305 V8. I tried this once before unsuccessfully as I had leaks at the rear seal. I want to do it again and do it right this time. My question is this: There are all kinds of gaskets available. One piece, three piece, cork, steel core etc. What kind of gasket should I purchase to make my chances of success the greatest? What kind of gasket sealer should I use? Any help will be greatly appreciated.
I am going to replace the oil pan gasket on my 1985 Chevy C10 305 V8. I tried this once before unsuccessfully as I had leaks at the rear seal. I want to do it again and do it right this time. My question is this: There are all kinds of gaskets available. One piece, three piece, cork, steel core etc. What kind of gasket should I purchase to make my chances of success the greatest? What kind of gasket sealer should I use? Any help will be greatly appreciated.
#2
CF Active Member
Join Date: Jul 2009
Location: San Francisco
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Felpro cork or mr.gasket. felpro has never let me down. and i put mr.gasket head gaskets on while my felpro's were leaking, took the leak down to a minimum.
Thread
Thread Starter
Forum
Replies
Last Post
Casual Mechanic
General Tech
0
June 22nd, 2015 11:20 AM
Mille Racer 69
Silverado & Fullsize Pick-ups
0
September 5th, 2013 9:53 PM
menz
Silverado & Fullsize Pick-ups
8
March 20th, 2012 8:11 PM