2004 Silverado 2wd 4.3 litre transmission issue
February 9th, 2020, 9:47 PM
#1
CF Beginner
Thread Starter
Join Date: Feb 2020
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2004 Silverado 2wd 4.3 litre transmission issue
Transmission is a 4L60E. Truck Starts fine, drives in 1st 2nd, but no 3rd or 4th gears has a high rev, fluid level is near full, but when I put it in drive and go only goes to 40 km ish and sounds like it's in neutral, no clunking, or grinding, or jolting or scraping sounds, reverse and park works fine neutral works too I am stumped should I buy a rebuilt kit new clutches, shift cable and solenoids or shall I start with simplest and go from there
Thread
Thread Starter
Forum
Replies
Last Post
Daniel Meshak
Silverado & Fullsize Pick-ups
0
January 29th, 2016 10:21 PM
Pwadwa2012
Silverado & Fullsize Pick-ups
0
December 15th, 2013 10:24 PM
Tom Steinhauer
Silverado & Fullsize Pick-ups
0
August 4th, 2013 2:42 PM