so i think the LEDs in my halos are fried. anyone know how hard it is to take em apart and replace em if thats even possible?

 

problem solved http://cgi.ebay.com/ebaymotors/94-95...3A1|240%3A1318

 

Its not possible to replace the LEDs I don't think.
So you bought new headlights?

 

not yet but im about to go to the bank to deposit the money

 

anyone know why the low beam side looks like it does on those?

 

Before you buy those man, it is indeed possible to change the LED's in halos. I have a buddy with a Camaro that changed his halo LED's to red LEDs to match his car; it looks pretty sick.

And the reason the low beam side looks kinda funky, is that they are projector headlights. I'm not sure what the significance of them being 'projector' headlights would be, but that's why they look that way, lol.

Also, if you choose to buy those new ones anyway, could I buy your old ones off of you for a reasonable price?

EDIT:

Here's a picture of my buddy's car with the red LED's in the halos that he changed out himself:

Reaper

He doctored the picture up some, but he didn't mess with the headlights/halos; he was just playing around with effects and crap. That's what the halos look like in person though.

 

Projectors focus the light output so that there is no light bleeding too high or too far out to the sides. Most of the time they have a sharp cutoff too to prevent blinding other drivers.
I think that type has an H1 bulb in the projector.

 

i see. thats what i was gonna do with the halos was change em to red but i dont have insurance cause i got laid off so i guess i could sell em. i think with shipping i paid around 250 for the whole light set up but seeins how the halos are fried (could be a loose wire but i dont think so) id say prolly like 75

 

Does it have a little black resistor box on the wiring harness?

 

i think so