Silverado, Sierra & Fullsize Pick-ups The Silverado & Sierra have been two of the best selling trucks in the US for decades, and is truly proven to be "like a rock".

2014 Chevy Silverado
Platform: Truck, GMT 400, 800, & 900
Old Jul 22, 2015, 2:36 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:

Browse all: Transmission
Print Wikipost

Transmission Fluid change. Drain/Fill or Flush? What type of oil?

Old Jul 12, 2010 | 9:16 AM
  #1  
jgray152's Avatar
Thread Starter
CF Junior Member
 
Joined: Jul 2010
Posts: 55
Likes: 0
Default Transmission Fluid change. Drain/Fill or Flush? What type of oil?

I have heard so many bad things about flushing transmissions. This truck has over 261,000 miles on it and not sure about flushing... I think I would rather them drop the pan to clean it out.

So should I just have it drained and filled? Has anyone had issues with flushing? I have no idea when the transmission was serviced last.

Sounds easy to do myself by loosening up the bolts on the pan and having it drain out...?

What is a good transmission fluid I should use?

Thanks for the help guys.
Reply
Old Jul 12, 2010 | 9:46 AM
  #2  
snakedoctor's Avatar
CF Beginner
 
Joined: Jul 2010
Posts: 19
Likes: 0
Default

http://www.gmfullsize.com/forum/showthread.php?t=179148

In early 2005, General Motors released a newly developed automatic transmission fluid (ATF) for the factory fill of all GM Powertrain stepped-gear automatic transmissions. The new fluid provides significantly improved performance in terms of friction durability, viscosity stability, aeration and foam control and oxidation resistance. In addition, the fluid has the potential to enable improved fuel economy and extended drain intervals. Because the performance of the new fluid far exceeded that of the DEXRON-III service-fill fluids available at the time, it became necessary to upgrade the DEXRON service-fill specification in order to ensure that similar fluids were available in the market for service situations. This latest upgrade to the service- fill specification is designated DEXRON-VI (fig. 1).



Since General Motors introduced the first ATF service-fill specification in 1949, it has been necessary to upgrade the specification periodically.

The upgrading process ensures that available service-fill fluids are of an appropriate quality for use in transmissions that have been designed around the factory-fill fluid performance.

TIP: As with previous upgrades, DEXRON-VI fluids are designed to be backward compatible with earlier transmission hardware. More importantly, earlier type fluids are not forward compatible with transmission hardware that was designed to use DEXRON-VI fluid.

DEXRON-III is not compatible with the most recently designed transmissions, and the use of these earlier type fluids could result in transmission damage. All current calibrations and certification tests are now conducted with DEXRON-VI ATF. DEXRON-III fluids should not be used for those applications where the owner manual recommends the use of DEXRON-VI.

TIP: GM does not license or support obsolete ATF specifications or the use of fluids that are being marketed against cancelled specifications.

All DEXRON-III licenses expired at the end of 2006 and will not be renewed. Beyond that date, GM will support only DEXRON-VI fluids for use in Hydra-Matic transmissions. Avoid fluids sold in the market after that date bearing claims such as “suitable for use in
DEXRON-III applications” or similar wording. DEXRON-VI licensed fluids are fully backward compatible and can be used in all applications covered by earlier GM ATF specifications.

The use of unlicensed fluids and/or non-GM approved aftermarket additives may prove detrimental to transmission performance and void warranty coverage.

- Thanks to (Name Removed)

Precaution: DEXRON-VI in Manual Transmissions

When DEXRON-III is indicated as the fluid fill for manual transmissions and transfer cases, DO NOT use DEXRON-VI. Instead, use GM Manual Transmission Fluid p/n 88861800 in these components.

TIP: Refer to PIP3836B (Feb. 2007).

If the manual transmission or transfer case indicates use of DEXRON-VI, then, of course, it should be used.

Purging Equipment

Before filling your bulk fluid equipment with DEXRON-VI, be sure to purge the old oil from it.

Also, be sure to purge your J-45096 Transflow machine before using it with DEXRON-VI.
Reply
Old Jul 12, 2010 | 7:36 PM
  #3  
wellmax's Avatar
CF Active Member
 
Joined: Feb 2008
Posts: 121
Likes: 0
Default

with that many miles i would just drain and replace filter and refill with std trans oil for the vehicle. Then repeat this procedure in 10K, do this twice and you wil have most of the oil changed.
Reply
Old Jul 12, 2010 | 8:22 PM
  #4  
MDTAHOE's Avatar
Super Moderator
Professional Mechanic
 
Joined: Nov 2008
Posts: 2,950
Likes: 5
From: Bowie, MD
Default

As long as you are having no problems with the trans and the fluid does not smell burnt the Flush, Flush, Flush. Dropping the pan only changes a small % of fluid. I have flushed hundreds of transmissions without a problem.

http://www.goss-garage.com/node/193
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Papa Bear
Uplander
4
May 7, 2014 7:51 PM
Vandeejim
Express, Savana & G-Series Vans
4
Aug 23, 2013 11:45 PM
raidrmark
Tahoe & Suburban
2
Sep 15, 2012 4:35 PM
Michael Smith
Tahoe & Suburban
4
Oct 25, 2011 9:07 PM
DeHartShadow
Impala
7
Mar 28, 2010 10:10 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:08 AM.