hey guys my question is about the hose that is connected to the water pump and has a T connector that has a smaller hose going to the fire wall and a larger hose going to the coolant overflow tank. The T connector has dry rotted or something so it has a small hole in it so it is leaking. What is the best way to fix it? Can I get a new "T" connector or should I get the whole heater hose assembly?
Thanks!!

 

I believe it usually comes as an assembly but if you shop around enough you might find the connector/fitting


if its dry rotted personally i'd do the whole assembly

 

You might try YouTube, lots of info there. Good luck.
David g.

 

Thanks for the response guys! David i was on YouTube yesterday and couldnt find anybody fixing the same problem most of what i found were people fixing the connector that goes into the fire wall or replacing the water pump and/or coolant tank.

Love this site lots of info!!