Last edit by: IB Advertising
See related guides and technical advice from our community experts:
- Chevrolet Silverado GMT800, GMT900, and K2XX How to Install Remote Start Alarm
Step by step instructions for do-it-yourself repairs
Which BYPASS(s)? Viper or Autopage Alarm install
#22
RE: Which BYPASS(s)? Viper or Autopage Alarm install
Two things.
1. Ground the 1701g to a chassis ground, not metal bracing for the dash. Find a spot of Painted sheetmetal and scrape away to bare metal and ground at this point. I think this is the problem
2. Reset the 1701g via the instructions if the ground doesn't work.
Also are you getting the ignition feed for the viper from the 1701g?
take note to also turn off the feature on the 1701 for unlocking with key removal. On some platforms and different alarms we've seen this feature unlock the doors when the RS feature timesout...food for thought
1. Ground the 1701g to a chassis ground, not metal bracing for the dash. Find a spot of Painted sheetmetal and scrape away to bare metal and ground at this point. I think this is the problem
2. Reset the 1701g via the instructions if the ground doesn't work.
Also are you getting the ignition feed for the viper from the 1701g?
take note to also turn off the feature on the 1701 for unlocking with key removal. On some platforms and different alarms we've seen this feature unlock the doors when the RS feature timesout...food for thought
#23
RE: Which BYPASS(s)? Viper or Autopage Alarm install
By igintion feed do you mean the 12v constant Red wires on both the 1701g and Viper if so they are both tied into the red/white on the back of the drivers side Fuse center. Or if you mean the Igniton wire for the remote start the pink wire This is hooked up to the Pink wire off the Key.
Also the 1701 doesnt say anything about reseting except for the settings which would just be the ZAP feature. I will try that and turn off unlocking with key removal.
And the Ground iwill relocate when i get home Is it getting some type of EMI / Interferance or something?
Also the 1701 doesnt say anything about reseting except for the settings which would just be the ZAP feature. I will try that and turn off unlocking with key removal.
And the Ground iwill relocate when i get home Is it getting some type of EMI / Interferance or something?
#24
RE: Which BYPASS(s)? Viper or Autopage Alarm install
ORIGINAL: dsteinmann
Is it getting some type of EMI / Interferance or something?
Is it getting some type of EMI / Interferance or something?
The 12v feeds for the rear of the fuse panel are Red/Black.
#25
RE: Which BYPASS(s)? Viper or Autopage Alarm install
Should i move both grounds over to the new point are just the 1701?
And the red/white must be fused going out to something. Is it nesccary to move this over to the Red/Black?
And the red/white must be fused going out to something. Is it nesccary to move this over to the Red/Black?
#26
RE: Which BYPASS(s)? Viper or Autopage Alarm install
I would use the red/black but thats me. I would and always ground my modules seperately.
Also when you cut the passlock 3wire, one side should of went to the 1701g orange/white and the other should go to anACCESSORY (orange)off the remote start. Did you do this?
Also when you cut the passlock 3wire, one side should of went to the 1701g orange/white and the other should go to anACCESSORY (orange)off the remote start. Did you do this?
#27
RE: Which BYPASS(s)? Viper or Autopage Alarm install
ORIGINAL: e
Also when you cut the passlock 3wire, one side should of went to the 1701g orange/white and the other should go to anACCESSORY (orange)off the remote start. Did you do this?
Also when you cut the passlock 3wire, one side should of went to the 1701g orange/white and the other should go to anACCESSORY (orange)off the remote start. Did you do this?
And i belive the key side of the Passlock went to the Orange/White of the 1701g
#28
RE: Which BYPASS(s)? Viper or Autopage Alarm install
[/quote]
And i belive the key side of the Passlock went to the Orange/White of the 1701g
[/quote]
correct.....and the other cut endgoes to the accessory from the remote start harness usually orange. Did you energize the cut end with the RS harness?
And i belive the key side of the Passlock went to the Orange/White of the 1701g
[/quote]
correct.....and the other cut endgoes to the accessory from the remote start harness usually orange. Did you energize the cut end with the RS harness?
#29
RE: Which BYPASS(s)? Viper or Autopage Alarm install
Ok i moved the ground 2 differnet spots same results turned off all the auto lock featuers on the 1701 NO change. But one time it unlocked right before it remote started then locked, and was good (isnt that what it should do)? I think im going to try another 1701g....... What do you think is that how its supposed to act by unlocking then relocking once started?
Thread
Thread Starter
Forum
Replies
Last Post
atex33
Silverado, Sierra & Fullsize Pick-ups
0
February 10th, 2013 12:18 AM
jcjoines
Silverado, Sierra & Fullsize Pick-ups
37
December 29th, 2011 4:44 PM
blackwidow1500
Silverado, Sierra & Fullsize Pick-ups
0
March 26th, 2011 10:30 PM