Help for installing the LED LIGHTS

January 11, 2025 at 8:39 pm
I need some help installing a Silicone tube+LED The voltage is C11-15V
POWER 7-16W
FUSE TYPE: 5* 20-3A
I m trying to install it on my 2003 Suburban 1500.
I installed it to the fuse for the low beam head lights using a fuse Tap. The fuse for the truck is a 10A I added a 7.5 A at first it was working fine then it went out. But the head lights still work just fine but the LED turned off. So do I need a higher fuse number ? And should I plug it to another fuse? I use the head light fuse because the LED lights need to start up when the head lights are turned on.
Please can someone help me out

I also added LED to the interior of my truck and the sun visor are not turning on and my glove compartment light doesn't turn on. I don't know if it's a fuse or what's going on.