One piece, custom mesh grille???
April 23rd, 2007 | 3:37 PM
#1
Thread Starter
CF Junior Member
Joined: Apr 2007
Posts: 38
Likes: 0
From:
One piece, custom mesh grille???
Does anyone know, or has anyone heard about a one-piece mesh grille for the 2007 Tahoe? Of course it would take some cutting,but I think it would look sick! Like this, but only for the Tahoe...
[IMG]local://upfiles/8361/F195227E3E13449FAF6C183886F912EE.jpg[/IMG]
[IMG]local://upfiles/8361/F195227E3E13449FAF6C183886F912EE.jpg[/IMG]
April 24th, 2007 | 6:48 PM
#2
CF Active Member
Joined: Jan 2007
Posts: 116
Likes: 1
RE: One piece, custom mesh grille???
Not sure what you mean. The '07 Tahoe grill is by default two pieces from the factory. Unless you're going to also do a conversion to replace the front end with a Yukon one, then you're not going to get the same "one-piece" look of the Yukon pictured in your post. It should be an easy swap from a Yukon onto a Tahoe.
April 24th, 2007 | 11:48 PM
#4
CF Senior Member
Joined: Apr 2007
Posts: 423
Likes: 0
From:
RE: One piece, custom mesh grille???
here's a link to the wife's truck https://chevroletforum.com/m_29142/tm.htm
April 25th, 2007 | 2:46 AM
#5
CF Veteran
Joined: Sep 2006
Posts: 1,136
Likes: 3
From:
RE: One piece, custom mesh grille???
On "Payback" Earnhardt Junior got his sister a Tahoe and they were going to cut the grille areato remove the center bar and make it one piece. These guys were pros and had inside info and support from GM and they didn't go ahead with it. Not enough support in the area on a Tahoe was the reason...I think.
April 27th, 2007 | 6:32 AM
#6
Thread Starter
CF Junior Member
Joined: Apr 2007
Posts: 38
Likes: 0
From:
RE: One piece, custom mesh grille???
ORIGINAL: tahoe07
On "Payback" Earnhardt Junior got his sister a Tahoe and they were going to cut the grille areato remove the center bar and make it one piece. These guys were pros and had inside info and support from GM and they didn't go ahead with it. Not enough support in the area on a Tahoe was the reason...I think.
On "Payback" Earnhardt Junior got his sister a Tahoe and they were going to cut the grille areato remove the center bar and make it one piece. These guys were pros and had inside info and support from GM and they didn't go ahead with it. Not enough support in the area on a Tahoe was the reason...I think.
April 27th, 2007 | 12:29 PM
#7
CF Addict
Joined: Sep 2006
Posts: 2,212
Likes: 3
From: Missouri
RE: One piece, custom mesh grille???
I personally dont like the 1 piece look of the yukon. That is the main reason i went with a Tahoe over the Yukon. The front end looks 100% better on the Tahoe, IMO.
Trending Topics
April 27th, 2007 | 12:51 PM
#8
CF Senior Member
Joined: Feb 2007
Posts: 339
Likes: 0
From:
RE: One piece, custom mesh grille???
i will keep you guys posted on the grill shell that is without the cross bar im not allowed to mention the company YET but i will keep you posted .and just to let you now i saw the prototype and it looks awesome!
May 1st, 2007 | 3:39 PM
#9
CF Beginner
Joined: Mar 2007
Posts: 9
Likes: 0
RE: One piece, custom mesh grille???
I have found something similar to a 1-piece grill for the Tahoe from Asanti. Hope this helps...
http://www.asantiwheels.com/gallery/files/205.jpg
http://www.asantiwheels.com/gallery/files/206.jpg
http://www.asantiwheels.com/gallery/files/205.jpg
http://www.asantiwheels.com/gallery/files/206.jpg
May 1st, 2007 | 3:48 PM
#10
CF Addict
Joined: Sep 2006
Posts: 2,212
Likes: 3
From: Missouri
RE: One piece, custom mesh grille???
WOW, I didnt think I would like a one piece as I dont like the yukons. However, I love that grille. Now for the important question, how much? I bet it is crazy high priced.
Anyone know where you can get it?
Anyone know where you can get it?