Should my rotors look like this?
#11
CF Beginner
Thread Starter
Join Date: Apr 2009
Location: Indianapolis
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the help. I'll take it on Mon and see what they'll do. Hopefully I won't be regretting my first GM purchase. I'll post the results.
#12
Shawn, don't know if you're still around, but what rotors would you put on a 2004 Burb LT 4wd? Thanks!
#13
Don't know if Shawn is still around but Brembo, Baer, Hawk,EBC, Raybestos are all very good brands. A few others I can't think of but any of those companies are top notch and stand behind their products.
#14
Administrator
If you are just now replacing your original ones, I would suggest going back with the OEM AC/Delco ones as they will give you at least the same amount of reliability and wear
#15
Thanks for the suggestions. I just bought the car used with 103,000 miles on it, so I don't really know if these are the original rotors. I don't need high end parts, but I've learned not to go cheap and have problems later.
#16
You're right about not needing high end and also about going cheap. I always like OEM unless its cheap Chinese stuff they used. But the brands I mentioned are all just as good and they each have they're version of good better and best.
#17
I use cheap brake parts...but I clean and service my brakes yearly so don't have problems. My vehicle also doesn't sit for long periods.
Last edited by tech2; February 25th, 2014 at 7:00 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Chevrolet Forum News
News, Concepts, SEMA
0
November 1st, 2012 6:38 AM
SabrToothSqrl
Tahoe & Suburban
23
June 29th, 2010 7:23 AM
tom5170
Silverado & Fullsize Pick-ups
12
March 17th, 2010 9:37 AM