Show your hoe/burb! Post them pics boys!
January 29th, 2007, 12:01 AM
#141
CF Junior Member
Join Date: Jun 2006
Location:
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
RE: SHOW YOUR HOE! POST THEM PICS BOYS!
Thanks all, Biglg your Hoe is very nice, as for AEM intake it's not that loud, only when I get on it you really hear it, I had to trim the inner fender with box cutters, it was easy. I don't know off hand what offset are the rims but they sit nice and flush with the fenders just the way I like it, tire size is 305/35/24
January 29th, 2007, 12:20 AM
#142
CF Addict
Thread Starter
RE: SHOW YOUR HOE! POST THEM PICS BOYS!
Can anyone that trimmed their fender liners take pics and show me where you trimmed them? I am just having a hard time picturing this. Are you cutting out a square right out of the middle of the liners, or are you trimming off some of the edge? I know it may be a pain in the *** but can someone show me where you are trimming the fender liners so I know what to expect when I do this!
Thanks,
Landon
Thanks,
Landon
January 29th, 2007, 12:28 AM
#143
CF Junior Member
Join Date: Oct 2006
Location:
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
RE: SHOW YOUR HOE! POST THEM PICS BOYS!
Sorry went out for some dinner with the wife...
I only took pictures of the HU, Amps, Screen, and Subwoofer box. I did not do the install.
Get's a little dirty with kids
I only took pictures of the HU, Amps, Screen, and Subwoofer box. I did not do the install.
Get's a little dirty with kids
January 29th, 2007, 12:36 AM
#145
CF Junior Member
Join Date: Jun 2006
Location:
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
RE: SHOW YOUR HOE! POST THEM PICS BOYS!
How I did it was drove the Hoe and then remove the rear wheels, you can see where the tires hit the inner fender liners, used box cutters and trimmed the fender liner where the tire marks are on the frnder linner,the only bad part is I had to do it 3 times to get it right on the money, I'm sure there is a easyer way but that is how I did it, hope this helps you out...
January 29th, 2007, 12:43 AM
#147
CF Junior Member
Join Date: Oct 2006
Location:
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
RE: SHOW YOUR HOE! POST THEM PICS BOYS!
ORIGINAL: biglg
Dirty, check this one out. I love this one. I think I like the wheels better than mine. I might have to change already, lmao! http://cgi.ebay.com/ebaymotors/2007-...QQcmdZViewItem
To answer for dirty, his rims are TIS07's, and he used the Eibach 38107.540. SOrry to butttt in!
Dirty, check this one out. I love this one. I think I like the wheels better than mine. I might have to change already, lmao! http://cgi.ebay.com/ebaymotors/2007-...QQcmdZViewItem
To answer for dirty, his rims are TIS07's, and he used the Eibach 38107.540. SOrry to butttt in!
]and no problem on the butting in 
. Thanks for answering it for me and you right on the money!
January 29th, 2007, 12:50 AM
#148
CF Junior Member
Join Date: Jun 2006
Location:
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
RE: SHOW YOUR HOE! POST THEM PICS BOYS!
Dirtywork,
Thanks, had the tail's& brake lights (med. tint), bowties, all done at the same time my 3/5 Mcgaughys drop kit was being installed at Billet Super Store inAnaheim Ca., they did a very good job on everything, check out there web-site www.billetsuperstore.com
Thanks, had the tail's& brake lights (med. tint), bowties, all done at the same time my 3/5 Mcgaughys drop kit was being installed at Billet Super Store inAnaheim Ca., they did a very good job on everything, check out there web-site www.billetsuperstore.com
January 29th, 2007, 12:56 AM
#149
CF Addict
Thread Starter
RE: SHOW YOUR HOE! POST THEM PICS BOYS!
Dirty, is that a custom built box? Or a sub/box kit? I would like to find a dual 12" box that goes all the way along the back, yet still has a flat top to put things on. Anyone found one out there yet?
