Viper Aftermarket Car Starter Help
#11
CF Beginner
Thread Starter
Join Date: Jan 2012
Location: Fort Mill South Carolina
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Ok tested the wire out of the bypass module today. I get a varying positive voltage between 10volts and as high as 22volts but it doesn't change at all when the door is opened or shut. I checked the rest of the unused wires and they have different readings but still no change with the door being open or not. any suggestions on how to fix my problem
#13
CF Beginner
Thread Starter
Join Date: Jan 2012
Location: Fort Mill South Carolina
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. would it really hurt if I don't isolate them as long as I'm monitoring the same side of the switch on all of them? I would think the computer would just always think all the doors opened when one does.
#15
Does your rig have individual door open indicators on the dash for each door? Or just a general door open light? The specific door open info is not something I would like to loose on my Tahoe.
#16
CF Beginner
Thread Starter
Join Date: Jan 2012
Location: Fort Mill South Carolina
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
It does have individual door messages. I never thought about that. I actually already bought the diodes just waiting for time to be able to get it done.
#17
CF Beginner
Thread Starter
Join Date: Jan 2012
Location: Fort Mill South Carolina
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Just a quick update got them all monitored individually with diodes to isolate them and everything works perfect now. thanks everyone alot!
Thread
Thread Starter
Forum
Replies
Last Post
Pwgsx
Silverado, Sierra & Fullsize Pick-ups
3
January 17th, 2013 5:24 PM
biglg
Tahoe & Suburban
29
September 23rd, 2008 7:54 PM