After pulling the driveshaft to replace u-joints, I have no fire. Fuel pump engages, gets fuel (plugs are wet), starter cranks, but we are getting no fire. Just got back in from replacing the sparkplugs as they were toast and it still won't fire. Any suggestions?

Vehicle info: 2000 Chevy Tracker 2.0L 4WD

 

If you have a problem only after doing work, then retrace your steps because you could have disconnected or loosened something by accident.

 

Thanks for the idea. We actually discovered that some how the engine was flooded? Not sure how that happened, but it is running fine now.