3rd row bench in 2nd row? HELP!
#1
3rd row bench in 2nd row? HELP!
Hey folks, I'm new to mini vans. I have a 99 Montana, same as the Venture. Can I use my third row bench in the 2nd row? I need 8 seats and I just bought a third row bench from Ebay because I was told that I could use the seats in the 2nd row by the dealer I bought the van from. I just tried to move my 3rd row bench to the second row, and it seems that due to the configuration of the floor anchors, there is no way to make it work. Any advice would greatly help!
#2
RE: 3rd row bench in 2nd row? HELP!
The carpoet will need to be cut and the little plastic bracket you will have to buy, the hole is there in the floor, just not cut out, but yes it is possible, feel the floor for where the bracket should be you will feel a hole, cut the carpet and go to a GM store and get the plastic tab....and you should be golden...
The original configuration was for 3 small seats in the middle row not the bench so the tabs are in different locations, the short came with bench in the middle so the holes are there just not cut yet
The original configuration was for 3 small seats in the middle row not the bench so the tabs are in different locations, the short came with bench in the middle so the holes are there just not cut yet
#3
RE: 3rd row bench in 2nd row? HELP!
ORIGINAL: MalibuMaxxSS
The carpoet will need to be cut and the little plastic bracket you will have to buy, the hole is there in the floor, just not cut out, but yes it is possible, feel the floor for where the bracket should be you will feel a hole, cut the carpet and go to a GM store and get the plastic tab....and you should be golden...
The original configuration was for 3 small seats in the middle row not the bench so the tabs are in different locations, the short came with bench in the middle so the holes are there just not cut yet
The carpoet will need to be cut and the little plastic bracket you will have to buy, the hole is there in the floor, just not cut out, but yes it is possible, feel the floor for where the bracket should be you will feel a hole, cut the carpet and go to a GM store and get the plastic tab....and you should be golden...
The original configuration was for 3 small seats in the middle row not the bench so the tabs are in different locations, the short came with bench in the middle so the holes are there just not cut yet
___
_F_]
(passenger side slots)
___
_E_]
___
_D_]
-----------------------------Center of Van----------------Front---->
___
_C_]
___
_B_] (driver side slots)
___
_A_]
#4
RE: 3rd row bench in 2nd row? HELP!
i am interested in this as well. i have a seven pass 2001 venture and want to turn it into a 8 pass for a trip. my second row seating is a single seat behind the driver and a single seat in the middle. is there another single seat designed for the third seat behind the passenger side? any help greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
shaffer911
Tahoe & Suburban
4
August 23rd, 2013 4:41 PM
aubiexx
OLD - PRIVATE For Sale / Trade Classifieds
2
December 18th, 2010 5:21 AM
d1nonly34
OLD - PRIVATE For Sale / Trade Classifieds
0
March 25th, 2009 10:24 AM
BTiddleybocker
Tahoe & Suburban
4
June 21st, 2008 8:37 AM