Chevrolet Forum - Chevy Enthusiasts Forums
My G3500 with its new custom made flatbed is now under the sleeper box. Ready to start the next stage of this build, which will begin tomorrow morning August 9, 2020.
My G3500 with its new custom made flatbed is now under the sleeper box. Ready to start the next stage of this build, which will begin tomorrow morning August 9, 2020.
0 2021/02/26 06:53:07
All is well. Trailer has been removed from under the sleeper box.
All is well. Trailer has been removed from under the sleeper box.
0 2021/02/26 06:52:09
Checking once more, the back side, just to be sure.
Checking once more, the back side, just to be sure.
0 2021/02/26 06:40:24
Yep, It will clear as I pull the trailer out.
Yep, It will clear as I pull the trailer out.
0 2021/02/26 06:39:20
Jump ahead and the box is up in the air. It is high enough that I can now pull the trailer out from under it.
Jump ahead and the box is up in the air. It is high enough that I can now pull the trailer out from under it.
0 2021/02/26 06:37:10
This side gave me a hard time. As I was lifting this side, the box wanted to lean forward and it kept me from getting the sawhorse under both 6x6 by myself. So, I had to come up with a solution to keep the one 6x6 up in the air that had the most load on in.
This side gave me a hard time. As I was lifting this side, the box wanted to lean forward and it kept me from getting the sawhorse under both 6x6 by myself. So, I had to come up with a solution to keep the one 6x6 up in the air that had the most load on in.
0 2021/02/26 06:14:16
Jacking up one side of the sleeper box, so I can get the sawhorse under the two 6X6.
Jacking up one side of the sleeper box, so I can get the sawhorse under the two 6X6.
0 2021/02/26 06:11:58
Cutting some 4x4 to length and securing them to the saw horses.
Cutting some 4x4 to length and securing them to the saw horses.
0 2021/02/26 06:03:16
Driveshaft loop removed and now sitting on top.
Driveshaft loop removed and now sitting on top.
0 2021/02/26 05:58:46
0 2021/02/26 05:58:10
Rivet heads ground off on both sides and ready to remove the two brackets.
Rivet heads ground off on both sides and ready to remove the two brackets.
0 2021/02/26 05:51:35
Rivet heads ground off on one side.
Rivet heads ground off on one side.
0 2021/02/26 05:48:31
0 2021/02/26 05:47:58
Need to Remove These Brackets
Need to Remove These Brackets
0 2021/02/26 05:45:57
My flip up bed design
My flip up bed design
0 2021/02/24 11:39:12
My personalized layout design.
My personalized layout design.
0 2021/02/24 11:37:51
Inside driver side, before I gutted everything.
Inside driver side, before I gutted everything.
0 2021/02/24 11:05:09
Inside passenger side, before I gutted everything.
Inside passenger side, before I gutted everything.
0 2021/02/24 11:04:01
In 2020, I brought this home on a Friday night in August.
In 2020, I brought this home on a Friday night in August.
0 2021/02/24 11:00:11
0 2021/02/22 12:01:17
0 2021/02/22 12:00:43
0 2021/02/22 08:32:51
0 2021/02/22 08:30:13
0 2021/02/21 17:10:08
0 2021/02/21 17:09:51
0 2021/02/21 17:09:34
0 2021/02/21 17:07:02
0 2021/02/21 15:29:14
The custom flatbed I had made for my G3500.
The custom flatbed I had made for my G3500.
0 2021/02/21 15:27:18
0 2021/02/21 15:24:12
This is when I got home after driving it from out west, where I purchased it, and I also hauled the power-plant for another project of mine with me, on the back.
This is when I got home after driving it from out west, where I purchased it, and I also hauled the power-plant for another project of mine with me, on the back.
0 2021/02/21 15:19:23
This is what I purchased for my G3500 Toy Hauler Project...
This is what I purchased for my G3500 Toy Hauler Project...
0 2021/02/21 08:13:10
Purchased this G3500 Cutaway in 2018.. This is how it looked when I got it with only 19,100 original miles.
Purchased this G3500 Cutaway in 2018.. This is how it looked when I got it with only 19,100 original miles.
0 2021/02/20 15:55:25