I have not been in here in a great while. Need help with a sticky or a kick *** write up in dept detail with torque specs. 99 Silverado extended cab Z71
Thank you

 

Anyone, Im in the miiddle installing it. Having the time of my life here. Thanks

 

If you use at least 2 guide studs , it makes install much easier and just make sure you cut a slot in the ends so they can be removed with a screwdriver.

 

Actually, Im past that point.. Im having issues with the top bolt at the very top. I used a swivel with an long extension to get it off,, but the wierd angle on the passenger side of the tranny is my only shot to put back in. Shopping for a long 15mm wobbler socket tomorrow,. Anyone out there have any positive feed back or alternative method? Im all ears, thanks.

 

This job is done with, nailed it.