Horse power and transmission questions
#1
![Default](/forum/images/icons/icon1.gif)
Hello,
i´m finally swapping my 250 inline 6 for a small block 350
, to my '67 Camaro
but i have a doubt.
The 350 is from a 79 caprice that produces 170hp, if i install a Edelbrock Manifold with a 750 cfm Edelbrock Carburetor, a Cam with Advertised Duration 272/ 282, Lift .442/ .465. New Hypereutectic Pistons (stock size), HEI Distributor, Performance headers, 3in X-Pipe Kit and a couple of 3in Glasspack´s what kind of power and torq should i expect from it?
If helps, the numbers on the block are: K0205DRB and 19J234346
And should i keep the 3 speed auto gear box or should i go for the manual 4 speed.
Thank´s for your attention.
Best regards
Hugo Neto
i´m finally swapping my 250 inline 6 for a small block 350
![](http://forums.chevyhiperformance.com/_siteconfigs/_global/images/community/bbcode/laugh.gif)
but i have a doubt.
The 350 is from a 79 caprice that produces 170hp, if i install a Edelbrock Manifold with a 750 cfm Edelbrock Carburetor, a Cam with Advertised Duration 272/ 282, Lift .442/ .465. New Hypereutectic Pistons (stock size), HEI Distributor, Performance headers, 3in X-Pipe Kit and a couple of 3in Glasspack´s what kind of power and torq should i expect from it?
If helps, the numbers on the block are: K0205DRB and 19J234346
And should i keep the 3 speed auto gear box or should i go for the manual 4 speed.
Thank´s for your attention.
Best regards
Hugo Neto
Thread
Thread Starter
Forum
Replies
Last Post
1988scotdale
Silverado, Sierra & Fullsize Pick-ups
6
October 5th, 2010 1:45 AM
petrou
Silverado, Sierra & Fullsize Pick-ups
8
April 3rd, 2008 7:36 PM