In need of some help!!!!!
#1
In need of some help!!!!!
OK so this what happened. We were driving home the other day running about 65-70 mph, and my fiance went to downshift to pass someone and went from 5th to 2nd on accident. The motor revved really high and after I shifted in into 4th for her, it started making a really bad knocking noise. When we got home I pulled the valve cover and pulled the push rods to see if they were bent at all. I took them and rolled them on a flat surface and they looked fine. Then I was told something about it could be a collapsed lifter. I put everything back together, started the car, and lifted the valve cover so I could see the rocker arms and the valve springs and I didn't see any of the lifters doing anything out of the ordinary. So worst case scenario I'll have to replace the motor again and was wondering what motors from cavs, sunfires, or s10's will work in my car?
Thread
Thread Starter
Forum
Replies
Last Post
Ryan Brickel
Silverado & Fullsize Pick-ups
3
May 25th, 2012 4:06 PM
sandlercd_22
Impala
1
January 5th, 2008 9:33 PM
Jasons1990lumina
Beretta, Corsica, & pre-1995 Lumina
1
February 23rd, 2006 1:26 PM