Rebuilt 327 with a flat cam lobe
August 5th, 2019, 3:04 PM
#1
CF Beginner
Thread Starter
Join Date: Aug 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Rebuilt 327 with a flat cam lobe
I have a 1963 Chevy impala and had the stock 327 rebuilt to factory specs with a flat tappet cam and had the cam go flat I took it back to the machine shop and they dont know why it went flat but put in a new cam and said no oil gallies had metal and the bearings were fine I had the same lobe go flat and now it’s not under warranty, what could have caused the same lobe to go flat I have hardly put any miles on it.
August 6th, 2019, 4:55 PM
#2
CF Monarch
I have a 1963 Chevy impala and had the stock 327 rebuilt to factory specs with a flat tappet cam and had the cam go flat I took it back to the machine shop and they dont know why it went flat but put in a new cam and said no oil gallies had metal and the bearings were fine I had the same lobe go flat and now it’s not under warranty, what could have caused the same lobe to go flat I have hardly put any miles on it.