queequeeg78

Hello everyone,

We have had problems with our equinox in the past couple of years, and about 2 years ago (after the warranty ended) we noticed the passenger side window wasn't responding, so I opened it up and noticed there was 3 wires that were just cut in half a clean cut actually. So I soldering them back but since then the right speaker sounds fuzzy. I opened the side rubber protector where the wires go into the door and I don't see anything else that is cut. I redid the solder again but still nothing.

So here is my questions

1. Is there a wire color code chart somewhere so I can see what wires are going and im thinking maybe a wire come out entirely.

2. The white plastic piece that is attached to the car where the wires are dispensed to the door, is that a connecter or is just a piece to hold the wires in place?

I am trying to look online for any answers but with absolutely no luck.

Thank you

tymr287

tymr287

The plastic piece is there to protect the wires from rubbing against the metal and cutting the wires.