Theft deterrent module help
January 9th, 2022, 8:09 PM
#1
Theft deterrent module help
Came home Yesterday to find my 2008 Chevy Express G2500 Van was broken into they broke door lock I guess they tried to take the truck cause they removed the cover from around the ignition, also they broke the anti Theft Deterrent module while pulling the wires from module. So I purchased a new one but the four wires that connect to the module were ripped of the connection plug. I got a new plug but it has a slot for five wires and also the Module has Five pins but there is only four wires that connect to Module A Green, Black, Brown and a Red I need help to Identify which wire goes to correct slot on plug? Also was wondering why they didn't take the van they had plenty of time I was gone four days. I would appreciate any help
January 9th, 2022, 9:27 PM
#2
try gmupfitter.com
The following users liked this post:
mountainmanjoe (January 17th, 2022)
January 16th, 2022, 5:32 PM
#4
Exactly what I needed after Inserting wires correctly and new door and ignition cylinders I ran the GM (VTD) Relearn Procedure she started right up Very happy to say we both are ready for work again THANK YOU
The following 2 users liked this post by Cabeco:
MiragePilot (January 18th, 2022),
Rednucleus (January 16th, 2022)
Thread
Thread Starter
Forum
Replies
Last Post
RJLee38
2007 - 2013 (GMT900)
1
September 27th, 2016 7:38 AM