General Tech Good at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.
Sponsored by:
Sponsored by: CARiD

2000 4l60E issue NEED HELP

Old Jul 30, 2018 | 6:01 PM
  #1  
justin kitelinger's Avatar
Thread Starter
CF Beginner
 
Joined: Jul 2018
Posts: 3
Likes: 0
Default 2000 4l60E issue NEED HELP

I NEED HELP! I have a 2000 Silverado z71 4x4 5.3. I took the bad 4l60 out and I have a donor truck exactly the same that I drove to the garage that shifted perfectly. So I put the transmission in mine changed the fluid and now it won't move. If I redline it, it will creep forward a little. I don't get it worked perfectly in the other truck. I've checked all the connections. Any advice would be greatly appreciated
Reply
Old Jul 30, 2018 | 11:34 PM
  #2  
oilcanhenry's Avatar
CF Monarch
 
Joined: Oct 2017
Posts: 4,605
Likes: 269
From: USA
Default

Originally Posted by justin kitelinger
I NEED HELP! I have a 2000 Silverado z71 4x4 5.3. I took the bad 4l60 out and I have a donor truck exactly the same that I drove to the garage that shifted perfectly. So I put the transmission in mine changed the fluid and now it won't move. If I redline it, it will creep forward a little. I don't get it worked perfectly in the other truck. I've checked all the connections. Any advice would be greatly appreciated
Assuming everything is hooked up and wired, its likely a pump or torque converter issue.

Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 6:38 PM.