trifonek

New to engine building, looking to rebuild a 350 for my friend. He bought a brand new aluminum intake and supposedly new heads too. If I am doing a top end rebuild, do I have to buy a new cam, springs, and valves to accommodate the aluminum heads? Or can I save and use the stock springs, valves, rockers, pushrods, and cam? Thanks, Kevin

old dog

you wont need a cam or lifters ,push rods.but i would put the correct spring's ,retainer's,lock's and spring seats, and new valves .

trifonek

What about rocker and arms? And thanks, what do you recommend for a kit?

old dog

just make sure that the stock v rocker's are in good shape and compatible with the head's they should be ok to use again .