bore out 283 to 350

Reply Subscribe

Thread Tools

Search this Thread

Apr 28, 2008 | 1:29 PM

justchilln1424

Thread Starter

CF Beginner

Joined: Feb 2008

Posts: 10

Likes: 0

bore out 283 to 350

Is it possible to bore a 283 to a 350. if not what is the max a 283 can be bored out to.

Apr 28, 2008 | 8:52 PM

313hitman

CF Active Member

Joined: Oct 2006

Posts: 157

Likes: 0

From:

RE: bore out 283 to 350

why not just get a 350 block from somewhere. 350's are all around and very affordable, it doesnt make sense to bore a 283 out.

Apr 29, 2008 | 5:35 PM

old dog

CF Veteran

Joined: Dec 2007

Posts: 1,019

Likes: 0

From:

RE: bore out 283 to 350

i would not advise it for the small price of a 350 block ,not to mention the cylinder's will be paper thin ,when you take about 1/8 of a inch out of the bore ,this would truly a grenade motor .

May 3, 2008 | 2:52 AM

2tallcustomz

CF Junior Member

Joined: Mar 2008

Posts: 82

Likes: 1

RE: bore out 283 to 350

that is true. the most you could bore out a 283 would be 60 over. which would but it at about 300cui. even that is a dangerous thing to do. anymore than that and you are asking for problems