C2500
Thread Starter
CF Beginner
Joined: Mar 2019
Posts: 2
Likes: 0
From: Georgia
C2500
Hello all I have a 98 c2500 with 5.7 vortec that has me scratching my head.I’ve replaced the following:injectors,plugs,wires,distributor cap,egr valve, fuel pump,ignition control module,fuel filter. I’m still having a skip in it and if you give it throttle while taking off it almost cuts off. It’s not throwing any codes that’s why I can’t figure out what’s wrong any help or advice would be appreciated!!
CF Monarch
Joined: Oct 2017
Posts: 4,605
Likes: 269
From: USA
Hello all I have a 98 c2500 with 5.7 vortec that has me scratching my head.I’ve replaced the following:injectors,plugs,wires,distributor cap,egr valve, fuel pump,ignition control module,fuel filter. I’m still having a skip in it and if you give it throttle while taking off it almost cuts off. It’s not throwing any codes that’s why I can’t figure out what’s wrong any help or advice would be appreciated!!
Thread Starter
CF Beginner
Joined: Mar 2019
Posts: 2
Likes: 0
From: Georgia
c2500
Thought that might be the problem seen couple videos said to unplug MAF sensor with engine running if continued to run that was the issue I unplugged mine and it continued to run so gonna try cleaning or replacing it will update
CF Monarch
Joined: Oct 2017
Posts: 4,605
Likes: 269
From: USA
