Service breaks soon

Reply Subscribe

Thread Tools

Search this Thread

Jun 29, 2013 | 3:20 PM

allen2112

Thread Starter

CF Beginner

Joined: Jun 2013

Posts: 1

Likes: 0

From: Las Vegas NV

Service breaks soon

2007 Suburban, the warning indicator sais “service breaks soon” breaks are in great condition and are NOT in need of servicing. How do I clear this or what can I do to find and eliminate this warning.

<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w

oNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w

ontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w:EnableOpenTypeKerning/> <w

ontFlipMirrorIndents/> <w:OverrideTableStyleHps/> </w:Compatibility> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]-->

Jun 29, 2013 | 11:44 PM

SWHouston

Super Moderator

Joined: Jul 2011

Posts: 1,545

Likes: 1

From: Houston TX. USA

You could drop by a Auto Parts Store like AutoZone. They can check and see if there are any Codes which might give you some guidance as to why you got the warning. Usually when messages like that are displayed, there's a very good reason for it.

They can re-set the ECM (Computer) for you then, and the message will probably go away...for a while.

Last edited by SWHouston; Jun 29, 2013 at 11:47 PM.