Stumped. .
July 26th, 2023, 7:31 PM
#1
CF Beginner
Thread Starter
Join Date: Jul 2023
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Stumped. .
Had to replace the BCM in my 09 LTZ (w/ 3.6L), with an interchangeable reman aftermarket Cardone BCM bc no Genuine GM part was āvailable.after being programmed, BCM was unable to communicate with the anti theft module, so vehicle would not start.
then I discovered that the OEM part has 207 terminals where as the aftermarket unit has a quantity of 185 terminals. Could this have anything to do with the aftermarket unit failing to communicate with the antitheft module?
then I discovered that the OEM part has 207 terminals where as the aftermarket unit has a quantity of 185 terminals. Could this have anything to do with the aftermarket unit failing to communicate with the antitheft module?
July 27th, 2023, 3:32 AM
#2
which vehicle please? LTZ means nothing.
Please read text at top of page: "IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION."
Please read text at top of page: "IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION."
July 27th, 2023, 4:29 AM
#3
CF Beginner
Thread Starter
Join Date: Jul 2023
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
July 27th, 2023, 4:27 PM
#4
what does that have to do with anything? It's a BCM for a particular vehicle is it not?
Thread
Thread Starter
Forum
Replies
Last Post