High beam problem
Thread Starter
CF Beginner
Joined: Jun 2009
Posts: 9
Likes: 0
High beam problem
2001 Impala
My high beams (all four bulbs) light up when you use the flash to pass position on the multi-function switch. If you pull the switch all the way back and release to keep the high beams on constantly, only the two inner brights stay on, the outer lowbeams turn off. Are all four bulbs supposed to be lit in constant highbeam operation? If so, there is a problem. Could this be a relay or switch problem or something else?
My high beams (all four bulbs) light up when you use the flash to pass position on the multi-function switch. If you pull the switch all the way back and release to keep the high beams on constantly, only the two inner brights stay on, the outer lowbeams turn off. Are all four bulbs supposed to be lit in constant highbeam operation? If so, there is a problem. Could this be a relay or switch problem or something else?
Last edited by firepop5; Jul 5, 2009 at 4:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post
otis_xing
Silverado, Sierra & Fullsize Pick-ups
1
Apr 13, 2013 2:31 PM
Klimbo
Silverado, Sierra & Fullsize Pick-ups
4
Jul 10, 2012 9:44 PM
