I've read all through these forums and have not found the answer to this problem. Here is the troubleshooting I have already done.

-Replaced battery - I knew it needed to be replaced because of corrosion (blue stuff) on the negative terminal and verified that it had 12.4 - 12.6 volts. Although now it reads 11.6.

-Traced to the Starter relay and completed the circuit. The engine DID crank! However will not start.

-Tried the anti-theft reset (even though the anti-theft light was not on)

-Tried starting in Neutral/Park, jiggling the shifter, 20 or so times

I'm not sure how to trace it down further.

 

crankshaft position sensor?


https://chevroletforum.com/forum/mal...p-66004/page2/

 

Hi schommy98,

I'm sorry to hear of the difficulties that you are experiencing with your Malibu. I would like to look further into your concern and contact your dealership on your behalf for further assistance. Please feel free to send us a private message with your full contact information, VIN, current mileage, and dealership name if any extra help is needed. I look forward to hearing from you!

Kristen A.
Chevrolet Customer Care

 

Having the same problem with my 08. beginning to think i should have bought a Toyota

 

Hi krick211,

I'm sorry to hear that you are also experiencing this concern with your Malibu. I will be sending you a private message in order to further discuss your concern. Hoping to hear from you soon!

Kristen A.
Chevrolet Customer Care

 

I should have updated this a long time ago. I had the vehicle towed to the dealer and the problem ended up being the ECM (Engine Control Module). It sits right in front of the battery.

 

I changed the crank position sensor and still won’t crank