2000-2002 Automatic Floor Shift solenoid
#1
2000-2002 Automatic Floor Shift solenoid
Hello and thanks for taking time to read this. I'm building a custom, using a 4L60E, and have attached a Blazer 2000-2002 floor shift in console. Since it's a custom, I am using a Painless Performance wiring harness.
Question, while I have the pigtail for the shift lock, I am puzzled as to why I can't get the solenoid to respond to 12 volts and ground. I have (2) of these shifters, neither solenoid will respond to power and ground. I should add, the pink and yellow wire will cause a dead short if attempting to connect those.
Does anyone know what the wiring sequence should be?
Thank you!
Question, while I have the pigtail for the shift lock, I am puzzled as to why I can't get the solenoid to respond to 12 volts and ground. I have (2) of these shifters, neither solenoid will respond to power and ground. I should add, the pink and yellow wire will cause a dead short if attempting to connect those.
Does anyone know what the wiring sequence should be?
Thank you!
Thread
Thread Starter
Forum
Replies
Last Post
HopeBee
Tahoe & Suburban
0
October 10th, 2017 5:33 PM