Removing wire "block" from driver side firewall
Thread Starter
CF Beginner
Joined: Apr 2019
Posts: 1
Likes: 0
From: ARIZONA
Removing wire "block" from driver side firewall
I am getting ready to remove my 2.3 4-cylinder iron Duke then try to rebuild it, (please save your just get a 4-3 or a 305 for another time) but for now under the firewall which I presume could be only behind the fuse block there's the water wires but I had a short in it prior to the motor dying how would I remove plug by plug
CF Beginner
Joined: Mar 2019
Posts: 8
Likes: 0
From: Kingman Arizona
I'd like to know too
Yes this us something I would like to know about too. I've had a short that I cannot find at all. My best guess after tracking about every wire in the truck is in the block going through the firewall.
