ok so i just got a 94 silverado with the 5.7 in it, and only has 94000 miles. im new to chevys and was wondering about some mods i could do to it? it already has exhaust but was looking at doing some other things to it like intake and a lift down the road. any other suggestions?

 

no one has any ideas? lift ideas, intake ideas nothing? give me some opinions on intakes lifts anything very optimistic

 

That is one gorgeous truck! Why anyone would want to bubble-gum it up is beyond me.

Allan

 

I would never lower a truck like that! A friend of mine did it with his '01 Ram 1500. Looks nice but not as good as a lift, in my opinion. And he always has problems with that low truck! It's not that easy to drive everywhere with a low truck and a long wheel base! My friend even damaged his transmission mount at driving to a fuel station!!!
I would raise it up and put some nice Cooper STT, BF-Goodrich MUD-Terrain or Interco Superswamper in 32x12.5x15 on it and do other optical mods

 

I would look at an intake and throttle body spacer. I would also change the trans fluid and filter soon. Get yourself some tie rod sleeves.

 

you talking maintenance/upkeep or performance upgrades? 100k is a good interval for a tune up and drivetrain flush, steering components and alignment could probably use some loving too.

 

Beauty! That's my red truck Bought with 6 miles; now 489K. 2nd tranny (200K) and engine (284K). Your's looks showroom. Now in the market for late-model replacement Silverado cause I think trans is about to go. Overdrive starting to slip. Good luck with your new truck!

 

i want to LIFT this truck not lower it and im talking performence. im planning on doing all the routine matinence on it and i know it needs a new passenger side axel seal

 

you got lucky that truck is as cherry as could be for being a 94 if i were you id do with little suspension lift, some toyo open counrty mts (good and quite for a mud terrain tire) , a tune up (for that truck id go wheatley) and some different rims i have 17's i like them but i dont have a lift.And shake that topper and go with a diamond plated tool box she would look real nice thats just what id do

 

wish i could get rid of the shell but i need it for my job.