Hey, I am trying to get a cylinder head off my 5.7 and can't get the bolts under the exhaust out. No room to get a wrench in there. And yes the exhaust is unbolted but I can't get it pushed back enough to get a wrench on them.
Any Ideas?
Thanks

 

You have to completely remove the manifold. You must be able to use a socket and ratchet because when you put it back together you have to use a torque wrench.

 

So I have to remove both sides?

 

Both heads or both sides of the manifold. If you are talking about both sides of the manifold then yes you must completely remove the manifold