2006 Burb Intermittent A/C

Reply Subscribe

Thread Tools

Search this Thread

Oct 28, 2022 | 5:42 AM

#21

Kenrbass

CF Beginner

Joined: Aug 2022

Posts: 13

Likes: 1

Show my response above yours to a good mechanic and they should be able to do what I did to "hotwire" it.

Oct 28, 2022 | 8:06 AM

#22

3Js

Thread Starter

CF Active Member

Joined: Jun 2020

Posts: 120

Likes: 14

From: Henderson NV

It was "hotwired" and worked but my wife wanted it fixed "right" and not "jerry-rigged".

Oct 28, 2022 | 8:16 AM

#23

Kenrbass

CF Beginner

Joined: Aug 2022

Posts: 13

Likes: 1

My hotwire situation uses the hi and lo pressure switches to make it a safer hotwire for the ac system. I'm a retired master tech and sometimes the juice is not worth the squeeze on an older unit.

Oct 28, 2022 | 9:27 AM

#24

3Js

Thread Starter

CF Active Member

Joined: Jun 2020

Posts: 120

Likes: 14

From: Henderson NV

Quote:

Originally Posted by Kenrbass

My hotwire situation uses the hi and lo pressure switches to make it a safer hotwire for the ac system. I'm a retired master tech and sometimes the juice is not worth the squeeze on an older unit.

Are you saying the BCM is at fault and you are bypassing the BCM control over the AC?

Oct 28, 2022 | 5:52 PM

#25

3Js

Thread Starter

CF Active Member

Joined: Jun 2020

Posts: 120

Likes: 14

From: Henderson NV

Quote:

Originally Posted by 3Js

UPDATE: Oct. 27, 2022.
Dropped off the burb at a shop.

Had the PCM replaced with one from company Flagship One. The shop replaced the HVAC control on the dash. Spent a few $$$$
Drove home agitated. Same issue. No AC. Not cycling.

Took it back today, a week later.
Evac system and refill. It was low maybe less than 1/4 lb of freon. Same issue. No AC. Not cycling
Changed the pressure sensors that I already replaced. Same issue. No AC Not cycling

Had to leave it overnight and they are going to check it out tomorrow. The mechanic doesn't know why it isn't working.
This is exactly why I took it to a shop because I already did everything they did and thought I needed a more experienced mechanic....I guess I was wrong.

So, it looks like it was a shorted electrical connector to the pressure transducer switch that was the final piece of the puzzle.
Could have been the original problem or a combo of the other components replaced.
AC is working now....

Last edited by 3Js; Oct 28, 2022 at 6:00 PM.