2009 Suburban LTZ factory camera module
January 6th, 2011, 2:12 PM
#22
CF Beginner
Thread Starter
Join Date: Oct 2010
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
April 10th, 2012, 2:00 AM
#23
CF Beginner
Join Date: Sep 2011
Location: Los Angeles, CA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
12v + at Reverse you tap light green wire in the taillight and if you need ignition 12v+ use pink wire in the brown connector at the junction block under the drivers side of the dash.
Read this post it has it all.<O
</O
https://chevroletforum.com/forum/showthread.php?t=22756<O</O
Read this post it has it all.<O
</Ohttps://chevroletforum.com/forum/showthread.php?t=22756<O
</OWhat if I do not have a pink wire in my BCM brown connector? This should be in cavity 7 of the (X12) connector but that cavity is empty! Worse yet, the BCM pin form that empty slot has no power!
I also do not have the back up light wire in my X11 connector which is the dark blue one in cavity 5...same issues as there is no pin in there anyway and no power from the BCM in that slot as well...
I have installed everything else from my Cubby Cam kit for the OEM back up camera on my nab unit and even programmed it with the Tech 2, but until I can find an ignition and back up source, all I am getting is a black screen with the safety message on top.
Thank you!
Thread
Thread Starter
Forum
Replies
Last Post
