Hello:

I would like to add a few more video screens for my headrest/visors. Is there somewhere I can hook into the stock head unit?

Jason[8D]

 

 

If you ever find an answer it should also answer my question on how to connect the stock flip down to an aftermarket Kenwood radio/DVD.

 

Here is a list of the wire color and function for the video screeen connectors:
The pin locations are numbered 1 thru 10 (right to left) as you are looking at the plug before it is unplugged with the release latch at the top possition.

Video Display - Front and Rear Video Connecter pin-outs are the same:
Wire Color
Circuit No.
Function

Pin 1
Wire color: D-GN
Curcuit No: 6975
Function: DVD Video Signal (+)

2
WH/BK
5335
DVD Video Signal (-)

3-4
--
--
Not Used

5
BK
2550
Ground (DNU)

6
BK
2550
Ground

7
RD/WH
3240
Battery Positive Voltage

8
WH
7066
Entertainment Remote Enable Signal

9
PK/BK
5844
Video Bright Control

10
L-GN/BK
5845
Video Module Signal

 

Thanks ZX1100F1....

Do you think it's possible to patch a Kenwood 6019 into the rear flip down using this information?

Nils

 

I don't see why not, but you would have to study the wires needed from the Kenwood DDX-6019 screen and make sure that they correspond to the available wires on the OEM unit plug.

 

ZX:

Thanks for your answer. I'm not sure why but I never got an email saying ppl/you added to this thread. Crazy. You said Pin 1 is +DVD Signal and pin 2 is -DVD signal... I was kind of expecting it to be an s-video connection, based on this I'm assuming it is a straight composite connection... Is this right??

Jason

 

Correct, composite video input.