Engine turns forever before firing....
Thread Starter
CF Beginner
Joined: Aug 2006
Posts: 14
Likes: 0
From:
RE: Engine turns forever before firing....
Uraijit,
I did the pressure test from the manifold, whenI turned the ignition on the line pressurized to about 50-52 lbs., but after turning the ignition off the pressure dropped to 0. I understood the line was supposed to remain pressurized? So just to confirm I ran the same check on my boy's Tahoe and when he turned the ignition off the line remained pressured at 53 lbs. Does this mean my regulator is going out? Or is the fuel pump going?
O.
I did the pressure test from the manifold, whenI turned the ignition on the line pressurized to about 50-52 lbs., but after turning the ignition off the pressure dropped to 0. I understood the line was supposed to remain pressurized? So just to confirm I ran the same check on my boy's Tahoe and when he turned the ignition off the line remained pressured at 53 lbs. Does this mean my regulator is going out? Or is the fuel pump going?
O.
Thread
Thread Starter
Forum
Replies
Last Post
jordan69s
Silverado, Sierra & Fullsize Pick-ups
10
Jun 1, 2007 11:08 AM