Jul 24, 2015, 4:33 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Engine and Powertrian
- Chevrolet Silverado 1999-2006 GMT800 How to Replace Throttle Position Sensor (TPS)
Step by step instructions for do-it-yourself repairs
Browse all: Engine and Powertrian
I cleaned my TB now high revs @ idle
CF Active Member
Joined: Oct 2020
Posts: 295
Likes: 43
The idle air control valve is part of the throttle body assembly and is likely riveted to it. In that case you will need to either replace the throttle body unit or drill out the rivets and see if you can find a separate IAC valve that you can attach to your throttle body. It looks like this:
https://www.rockauto.com/en/moreinfo...433403&jsn=922
Super Moderator
Joined: Mar 2011
Posts: 9,175
Likes: 521
CF Beginner
Joined: Mar 2021
Posts: 1
Likes: 0
Dont waste your time on a drive cycle. Ive had a low success rate w that. Simply disconnect negative battery cable and pump brake pedal 3x. Reconnect battery and your idle should jump to 1800, then settle down to 900-1000 rpm in park in a matter of seconds. THIS WORKS!
Thread
Thread Starter
Forum
Replies
Last Post
jlutty3
Silverado, Sierra & Fullsize Pick-ups
1
Mar 2, 2015 9:33 PM
