LED interior and license plate lights
July 27th, 2013, 6:49 PM
#21
Administrator
Thread Starter
Okay, my next set of LED's arrived, they don't have as many LED's as the previous set did so they will not be as bright but that is okay as I really don't want my license plate lit up like a road side billboard for Buc-ee's anyway ...
These are also from Amazon, they were $5.99 for 8 of them.. > The picture of them installed is with the cover shield off, I did put it back into place but wanted a picture that displayed what they look like sans cover.
I'll try and follow up with a night picture but those can be rather subjective as the aperture open time can make them as bright as the sun or as dim as a distant star... but you'll get the idea...
These are also from Amazon, they were $5.99 for 8 of them.. > The picture of them installed is with the cover shield off, I did put it back into place but wanted a picture that displayed what they look like sans cover.
I'll try and follow up with a night picture but those can be rather subjective as the aperture open time can make them as bright as the sun or as dim as a distant star... but you'll get the idea...
Last edited by in2pro; July 27th, 2013 at 6:53 PM.
July 29th, 2013, 9:47 AM
#22
Administrator
Thread Starter
I took a quick picture this morning... it was with my phone so the pic isn't that great and the street light was casting its orange glare... none the less I think the new ones are adequate....
July 31st, 2013, 10:02 AM
#24
CF Junior Member
Join Date: Mar 2013
Location: Spring Branch, TX
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Do you think these will burn out/fall apart like the last ones did? I can only find that they are built for 12v, I cannot find anything that says they are rated for up to 14v. Thanks
August 1st, 2013, 12:36 PM
#26
CF Junior Member
Join Date: Mar 2013
Location: Spring Branch, TX
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
August 7th, 2013, 11:17 AM
#27
Administrator
Thread Starter
So far the license plate lights are holding up...but I want a real world test... So with the help of my battery charger and some test clips and a meter we will see how it holds up...
Charger set to 12v 10amp output reads almost 14v no load...
Hook up the LED and the voltage drops a bit with the load to about 12.5v...
This should be every bit of what it would get in the truck... I'll give it a few hours
Charger set to 12v 10amp output reads almost 14v no load...
Hook up the LED and the voltage drops a bit with the load to about 12.5v...
This should be every bit of what it would get in the truck... I'll give it a few hours
August 9th, 2013, 4:44 PM
#29
CF Junior Member
Join Date: Mar 2013
Location: Spring Branch, TX
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
November 2nd, 2013, 8:15 PM
#30
Administrator
Thread Starter
Just a follow up on this threat about the LED's holding up...
so far all of the interior ones have been performing well no issues...
the replacement LEDs T10 194 168 501 4-smd 3528 LED Car Light Bulb White referred to in post #21 are also doing well for the license plate...
At this post writing the are 3 months old and doing well
License plate LED's
so far all of the interior ones have been performing well no issues...
the replacement LEDs T10 194 168 501 4-smd 3528 LED Car Light Bulb White referred to in post #21 are also doing well for the license plate...
At this post writing the are 3 months old and doing well
License plate LED's