New to the forum, got some questions..
#11
Administrator
I'm now getting power to everything again. I was testing my fuse panel and found no power to the ignition fuse. I used a jumper wire and am now getting power to my ignition fuse. The fuel pump now comes on but truck still wouldn't crank. I did some more investigation and found the crank fuse has no power going to it, so I used another jumper wire to the crank fuse and am now getting power to the crank fuse. I pressed down the clutch and the truck cranked right up. The key isn't even in the ignition. I press the clutch again and it grinds the starter. The clutch is acting as my ignition now what do I do?? I'm lost.
Thread
Thread Starter
Forum
Replies
Last Post
Ryan Brickel
Silverado & Fullsize Pick-ups
3
May 25th, 2012 4:06 PM
smittyman
Tahoe & Suburban
6
August 17th, 2009 9:33 PM
sandlercd_22
Impala
1
January 5th, 2008 9:33 PM