I'm not seeing why would you want to debag your Hoe? What does it do, drop it a little?

Mine is in the paint shop right now, the day I installed my Phat Grille a piece of re-bar came off a truck in front of me and bashed the whole front end, including the new grille ( at least it didn't go through my face...). I will get some pics up when it gets out.

How do you smoke the tail lights? I know you can use tint, but do paint shops do it too?

Thanks

C

 

Terd.

The front is one piece but the Black is part of it. The front gold and black come off together and leave chrome behind it... but there are two big holes in it for the attachment pins and one small one for no reason.. no luck!!



[IMG]local://upfiles/3763/DDA68C135C1A4B6181A1A96A5B9E4CE5.jpg[/IMG]

 

Several have reported that you can sometimes use a heat gun to eliminate slight rubbing issues by softening the plastic and remolding it out of the way.

 

since my ride's black...i was thinkin bout painting the bowtie black. i would like to take the gold bowtie off, but since there are 2 pin holes on the chrome, i dont want to leave it lookin like it got shot. lol are there 2 pin holes for the rear as well?

anything u know that would cover that up?

now im undecided.[]

 

Maybe this will help.

[IMG]local://upfiles/1622/ADFA6EC7943843CC953BCE8DFFCFE4C0.jpg[/IMG]

 

That looks TIGHT!

 

yeah..looks pimp like that. did u take off the bowtie then paint the chrome partblack? or painted the goldbowtie black?

 

Here is front showing the chrome bowtie and the HID's, and an image of the rear showing the LED tails during the day and the LED license plate bulbs

[IMG]local://upfiles/9428/25208AF0CF3A4DA7BC4A674EBEDD4A29.jpg[/IMG]

[IMG]local://upfiles/9428/8B4EEE2307B946029F90B0E197968D04.jpg[/IMG]

 

Well done Manny - sweet ride.

 

Removed and painted the gold bowtie which when replaced, leaves a chrome surround.