what is up with the timing
Thread Starter
CF Beginner
Joined: Mar 2006
Posts: 7
Likes: 0
what is up with the timing
I have a 96 with a 5.7 V8, i blew a intake gasket last week, water just coming out of the intake.
I got it all back together and i am ready to time the distibitor and the tag tells me thier is no ajustment and the computer will do that and the idle. i have unpluged the plug behind the distibitor and i still cant get the timing to go to -0-. the truck runs good. I am worried that thier maybe no ajustment but is thier a way i have to have it set so the computer dosent have to work so hard.
thanks
I got it all back together and i am ready to time the distibitor and the tag tells me thier is no ajustment and the computer will do that and the idle. i have unpluged the plug behind the distibitor and i still cant get the timing to go to -0-. the truck runs good. I am worried that thier maybe no ajustment but is thier a way i have to have it set so the computer dosent have to work so hard.
thanks
CF Beginner
Joined: Jun 2006
Posts: 3
Likes: 0
From:
RE: what is up with the timing
The distributor on those engines are really a cam sensor and have to be set to 0° offset with a scanner thru the DLC port.
You can get it really close if not spot on by lining up the paint index marks applied @ the factory. Use a mirror and look at the
base of the dist. and intake at the back of the engine. There will be a white paint mark if you didn't clean it off during the repair.
Good Luck,Steve
You can get it really close if not spot on by lining up the paint index marks applied @ the factory. Use a mirror and look at the
base of the dist. and intake at the back of the engine. There will be a white paint mark if you didn't clean it off during the repair.
Good Luck,Steve
Thread
Thread Starter
Forum
Replies
Last Post
