Tracker 1989-2004
This compact SUV proved itself to be a fine ecnomical vehicle, good for making its way along any type of surface.
Platform: CAMI (Suzuki)

No start

Old May 12, 2024 | 6:21 AM
  #11  
MoterMitch's Avatar
Thread Starter
CF Junior Member
 
Joined: Apr 2024
Posts: 52
Likes: 10
Default

Sorry for the delay in my response a friend is let me borrow his snap on advantage tester but I have a little to no experience with it but it’s fairly self-explanatory and it does have the oscilloscope feature. Hopefully today I will be able to successfully run the test and get back with you as soon as possible, thanks for your help to be continued
Reply
Old May 14, 2024 | 1:27 PM
  #12  
MoterMitch's Avatar
Thread Starter
CF Junior Member
 
Joined: Apr 2024
Posts: 52
Likes: 10
Default No start

ok hopefully I can show this video of my first test on the cam senso​​​

You can see that the signal is not correct and now I’m waiting for suggestions
Reply
Old May 14, 2024 | 2:27 PM
  #13  
MoterMitch's Avatar
Thread Starter
CF Junior Member
 
Joined: Apr 2024
Posts: 52
Likes: 10
Default

that was a failure I'm going to get some help posting the video.
Reply
Old May 14, 2024 | 4:42 PM
  #14  
L84sky's Avatar
CF Pro Member
 
Joined: Oct 2018
Posts: 680
Likes: 157
Default

Probably don't need a video if you can get a screen shot from the scope. Most importantly, did you have a CMP waveform when you cranked the engine?
Reply
Old May 15, 2024 | 5:43 PM
  #15  
MoterMitch's Avatar
Thread Starter
CF Junior Member
 
Joined: Apr 2024
Posts: 52
Likes: 10
Default


Reply
Old May 15, 2024 | 5:47 PM
  #16  
MoterMitch's Avatar
Thread Starter
CF Junior Member
 
Joined: Apr 2024
Posts: 52
Likes: 10
Default

I hope you can see this from the scanner! Sparking erratically and I have fuel pressure but the NOID light and injectors don’t seem to be getting any signal??? hELP!!!
Reply
Old May 15, 2024 | 8:20 PM
  #17  
L84sky's Avatar
CF Pro Member
 
Joined: Oct 2018
Posts: 680
Likes: 157
Default

>> injectors don’t seem to be getting any signal

Try a two-second blast of starter fluid into the throttle body while the engine is cranking. Does it even try to fire?
Reply
Old May 15, 2024 | 9:04 PM
  #18  
MoterMitch's Avatar
Thread Starter
CF Junior Member
 
Joined: Apr 2024
Posts: 52
Likes: 10
Default

good evening i just did as requested and the results were as i predicted, a little sign of life followed by a backfire! this is exactly what happened at the shop, and they said timing chain ,even after performing a compression test for them. compression all cylinders were above 175 psi .I put a new set of chains on and had all the techs check my timing marks.so i would be surprised if timing chain is the problem.
Reply
Old May 15, 2024 | 9:15 PM
  #19  
MoterMitch's Avatar
Thread Starter
CF Junior Member
 
Joined: Apr 2024
Posts: 52
Likes: 10
Default

I did notice a lot of unusual noise coming from intake side while cranking. And i just remembered that i had the EGR valve off and cleaned the entire system to get rid of a code for emission inspection which it went the 100 miles and passed. But it wasn't long after that when the no start happened ????
Reply
Old May 16, 2024 | 9:42 PM
  #20  
MoterMitch's Avatar
Thread Starter
CF Junior Member
 
Joined: Apr 2024
Posts: 52
Likes: 10
Default

hello, I just thought I would throw that out there.im also wondering if I pull the valve cover if I could set the cam in a certain way and check the alignment on the signal rotor? as I've said any help, or suggestions would be appreciated!!!! THANKS
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 8:21 PM.