restrictor plate
November 12th, 2007, 9:29 PM
#2
CF Beginner
Join Date: Nov 2007
Location:
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
RE: restrictor plate
Do you mean an intake restrictor plate? I've taken off 2.4L and 2.2L TBs and intake manifolds and have not seen a restrictor plate of any kind. Not in the exhaust either.
The 2.4 uses a 1-piece plastic intake manifold with a 68 MM TB (base opening measurement - not venturi).
The 2.2 uses a 2-piece glued-together intake manifold with a 60 MM TB (base opening measurement - not venturi). The 2.4 intake manifold has larger runners and the TB is centrally located while the 2.2 TB is offset to the drivers side.
The 2.4 uses a 1-piece plastic intake manifold with a 68 MM TB (base opening measurement - not venturi).
The 2.2 uses a 2-piece glued-together intake manifold with a 60 MM TB (base opening measurement - not venturi). The 2.4 intake manifold has larger runners and the TB is centrally located while the 2.2 TB is offset to the drivers side.
Thread
Thread Starter
Forum
Replies
Last Post
MWRacing
Silverado & Fullsize Pick-ups
2
February 14th, 2007 11:27 PM
ltzmego
Tahoe & Suburban
3
September 26th, 2006 10:58 PM
