Hello everyone,

I recently bought a 2001 Sonoma, 2.2L - 5 speed. Nice truck, hit in the driver fender/bumper area. The base structure has been fixed, frame straightened, fender replaced, etc. Truck has 60k miles and I paid $600 for it. Runs and drives. I'm rebuilding this for my sons first pickup. I'm close to done, replaced the fuel pump, cleaned the tank, new plugs, etc. I want to do a clutch fan delete for better cooling and the fan shrouds are hard to find for this truck.

#1 - Does anybody know the correct plumbing for the vapor purge valve? The one below the intake.

#2 - Any good electric fan shrouds available online? I could build one but wanted to see if there's an affordable option online first. I have the fan, 14" 3800 cfm I believe.

#3 - What's the correct wiring for the fuel pump. One of the connectors is gone, the 4 pin, I think it's for the purge side of the unit.

#4 - What's the correct wiring for the AC Compressor? Connector is gone. I think I found the 2 wires, just need to know -/+ orientation.

#5 - Recommended muffler? I want to put a better sounding exhaust on this truck, but I don't want it to sound stupid. I have installed a stainless exhaust header and downpipe. Looking for a deeper, sound. I know that's hard to do with the 4 cyl.