Here's my issue, my tranny died in my 97 c1500. I have a tranny from a 95 c1500 handy. After researching my understanding is the TCC is PWM in the 95 but the 3-2 solenoid is different and will force limp in mode if installed in the 97. Also, I've been told by local guys that it will work by a simple change in wiring that they will gladly do for 50 bucks....So that being said I'm needing to know specifics of what can be done (if anything) to make this work. I make my living as a technician but I'm still young and I'm sure a lot of you guys have seen more than me. Thanks in advance.

 

Soooo did the 60 people that viewed this ignore it or am I missing something obvious?

 

yes the TCC is PWM, but IDK WTF