When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2008 Suburban 1500 sway bar mount tore out of the frame
Tahoe & SuburbanThe power, space, and brutal towing ability make the Tahoe and its longer sibling, the Suburban, arguably the best full size SUV's on the market today.
Platform: GMT 400, 800, 900
2008 Suburban 1500 sway bar mount tore out of the frame
Just had a look at my 2008 3/4 ton Suburban that I owned from new. It has L shaped plates welded to the frame. It came from the factory like that. I’ll try get some pics.
SD
Last edited by Suburban Dude; Dec 31, 2017 at 5:20 PM.
Here is a pic of my 2008 3/4 ton Suburban frame
showing where the reinforcement plate is welded to the frame. This taken looking up at it. You can make out the bottom and as it wraps around the corner the weld beads blend into the steel of the frame. This is from the factory.
For the last shot I pulled back the plastic fender liner and took a shot of where the stabilizer bar makes its bend.
Last edited by Suburban Dude; Dec 31, 2017 at 5:17 PM.
I have made and installed a few of these now and it takes a competent welder about 1 to 1 1/2 hours per side to install. Once installed and painted these look almost factory. Here are some pictures of them installed and painted.
I have made and installed a few of these now and it takes a competent welder about 1 to 1 1/2 hours per side to install. Once installed and painted these look almost factory. Here are some pictures of them installed and painted.
