Hey folks,

I think the front wiper motor on my 2011 Suburban is dead. The last few weeks it's been wiping very slow and just on Friday stopped working completely. I've purchased a replacement wiper motor with transmission (gm part 25923882) but can't find any online instructions or videos showing how to replace it. I've seen lots of videos for older generation Burb's but not for the 07+.

Has anyone done this on their car or know whether this is a complicated job that's better left to the pros? I'm handy around the house but have never worked on car mechanics!

Any links to instructions would be appreciated too!

 

attached documents , see second threat for procedure

 

Attached , the above documents are referenced in this main document

 

Thanks In2Pro for the instructions. Changed up the wiper motor yesterday and worked like a charm. Most challenging part was removing the old seized one as a whole. But got it out with nothing broken.

Once again thank you SO much for taking the time to respond. Those instructions saved me +350$ (dealership wanted 300$ for the motor + 2 hrs labor, I found it online for 150$ and took 1.5hrs to complete).

 

You are welcome, your follow up is what makes forums work