External Transmission Cooler
Thread Starter
CF Beginner
Joined: Nov 2008
Posts: 11
Likes: 0
External Transmission Cooler
I am looking installing an aux. transmission cooler for my 08 Montana van. I have found information as shown below:
- Removing the return line at top of the rad.
- A Hayden connector part number 397 inserting into the same place in the rad.
- One end of the aux transmission hose connects to the connector 397.
- No information on how to connect the other end of return line removed from the rad.
Do I need another connector? If yes, what do you call it and if it is required some tools?
Is it safe to connect the other aux transmission line to the cooler line as is (with a clamp) ?
- Removing the return line at top of the rad.
- A Hayden connector part number 397 inserting into the same place in the rad.
- One end of the aux transmission hose connects to the connector 397.
- No information on how to connect the other end of return line removed from the rad.
Do I need another connector? If yes, what do you call it and if it is required some tools?
Is it safe to connect the other aux transmission line to the cooler line as is (with a clamp) ?
Thread
Thread Starter
Forum
Replies
Last Post
zagfan1989
Tahoe & Suburban
13
Sep 27, 2011 12:42 PM
Elite98
Beretta, Corsica, & pre-1995 Lumina
2
Aug 8, 2009 11:25 PM
