Site Feedback THIS SECTION IS FOR SITE RELATED ISSUES ONLY!! NO TECHNICAL QUESTIONS OR ANYTHING RELATED TO FIXING AN AUTOMOBILE

1997 chevy k2500 5.7

Thread Tools
 
Search this Thread
 
Old Nov 20, 2021 | 8:28 PM
  #1  
Woodthomas's Avatar
Thread Starter
CF Beginner
 
Joined: Dec 2020
Posts: 2
Likes: 0
Default 1997 chevy k2500 5.7

My truck died on me going down road I have it towed to oreillys and they put a code reader on it and it showed mass air flow sensor and then it started so I went a head and replaced it. The next day it did the same thing dies while driving. And I haven't got it to start ever since. I have put new spark plugs and wires in it. I replaced fuel pump, has new battery, replaced starter, put new ignition coil, and still nothing. It's not even throwing a code. Can anyone help me.
Reply
Old Nov 21, 2021 | 7:28 AM
  #2  
oldchevy's Avatar
CF Monarch
10 Year Member
Liked
 
Joined: Apr 2012
Posts: 6,219
Likes: 438
From: Miami, FL.
Default

First determine if you are getting spark, so that you know if it is a fuel or ignition problem. You can spray gas into the throttle body to see if runs for a few seconds. I have also seen a crank sensor be bad and not throw a code. Cam sensor also.
Reply
Old Nov 21, 2021 | 9:00 AM
  #3  
Rednucleus's Avatar
CF Addict
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2014
Posts: 2,334
Likes: 308
From: Marysville, WA
Default

My 93 Sub has done this 3 times over the years; has always been the ICM - I could run it putting fuel in the throttle body - had spark but no fuel
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Steven Carter
New Member Welcome Area
1
Nov 20, 2019 9:36 PM
Steve1979
New Member Welcome Area
0
Mar 8, 2018 10:55 PM
Lucius Cross
New Member Welcome Area
1
Nov 27, 2016 9:37 PM
Dbarcus1221
North Eastern
1
Nov 1, 2016 3:33 PM
blueharleymn
New Member Welcome Area
1
Dec 31, 2014 5:11 PM




All times are GMT -5. The time now is 12:15 PM.